E.L. Leusheva, D.A. Russkov, A.O. Morozov
DOI: https://doi.org/10.25689/NP.2026.2.253-298
Abstract
Within the framework of this study, a comprehensive investigation was carried out into the effect of reagents used in practice that influence the rheological properties of drilling fluid. An assessment was made of changes in the nature of the rheological behavior of the drilling fluid during the addition of polymer reagents. The study was conducted with the addition of different reagent concentrations. All fluids were initially under equal conditions, with the exception of the substance under consideration.
The results obtained provide convincing information on which model a given drilling fluid belongs to. The Herschel-Bulkley rheological model was not considered in this study, since this model is capable of combining all the other behavior models examined: Newtonian, Shvedov-Bingham, and Ostwald-de Waele.
Key words:
drilling fluids, rheological properties, non-Newtonian fluids, drill cuttings, viscosity, environmental risks, biodegradable polymers
References
2. Litvinenko V.S., Petrov E.I., Vasilevskaya D.V., Yakovenko A.V., Naumov I.A., Ratnikov M.A. Otsenka roli gosudarstva v upravlenii mineral’nymi resursami [Assessment of the Role of the State in the Management of Mineral Resources] // Zapiski Gornogo Instituta. – 2023. – Vol. 259. – pp. 95–111. DOI: 10.31897/PMI.2022.100 (in Russian)
3. Straupnik I.A., Rybakov D.A., Dorokhin E.G., Andreev K.V. Flushing Fluid Dynamics in a Flowing Piston with Confusor Transition Modelling // International Journal of Engineering. – 2025. – No. 38. – pp. 937–944. DOI: 10.5829/ije.2025.38.04a.21
4. Boxue P., Wang S., Xiaoxue J., Huilin L. Effect of orbital motion of drill pipe on the transport of non-Newtonian fluid-cuttings mixture in horizontal drilling annulus // Journal of Petroleum Science and Engineering. – 2018. – Vol. 174. – pp. 201–215. DOI: 10.1016/j.petrol.2018.11.009
5. Asadullin R.R. Razrabotka retseptury burovykh rastvorov dlya bureniya kruto naklonno-napravlennykh i gorizontal’nykh skvazhin [Development of a Drilling Fluid Composition for Directional Wellbore Drilling with Account of Rheological Parameters] // Burenie i neft’. – 2011. – No. 4. – pp. 42–44. (in Russian)
6. Lyagov I.A., Lyagov A.V., Isangulov D.R., Lyagova A.A. Vybor neobkhodimogo kolichestva promyvochnykh perevodnikov v spetsial’noi komponovke i issledovanie ikh raboty pri burenii radial’no-razvetvlennykh kanalov sektsionnymi vintovymi dvigatelyami [Selection of the Required Number of Circulating (Wash) Subs in a Special Bottom-Hole Assembly and Investigation of Their Performance when Drilling Radially Branched Channels with Sectional Positive-Displacement Motors ] // Zapiski Gornogo Instituta. – 2024. – Vol. 265. – pp. 78–86. EDN: ZBPWKU (in Russian)
7. Cherepovitsyn A.E., Tsvetkov P.S., Evseeva O.O. Kriticheskii analiz metodicheskikh podkhodov k otsenke ustoichivosti arkticheskikh neftegazovykh proektov [A Critical Analysis of Methodological Approaches to Assessing the Sustainability of Arctic Oil and Gas Projects ] // Zapiski Gornogo Instituta. – 2021. – Vol. 249. – pp. 463–479. DOI: 10.31897/PMI.2021.3.15 (in Russian)
8. Blinov P.A., Nikishin V.V., Salakhov K.N., Kuchin V.N. Development of Cement Slurry Composition with Self-healing Properties // International Journal of Engineering, Transactions A: Basics. – 2025. – Vol. 38, No. 1. – pp. 236–246. DOI: 10.5829/ije.2025.38.01a.21
9. Kadochnikov V.G., Dvoynikov M.V. Development of Technology for Hydromechanical Breakdown of Mud Plugs and Improvement of Well Cleaning by Controlled Buckling of the Drill String // Applied Science. – 2022. – No. 12. DOI: 10.3390/app12136460
10. Yang G., Liu T., Blinov P., Wang Y., Feng Y., Wen D., Fang C. Temperature regulation effect of low melting point phase change microcapsules for cement slurry in nature gas hydrate-bearing sediments // Energy. – 2022. – Vol. 253. DOI: 10.1016/j.energy.2022.124115
11. Fialkovskiy I.S., Korneev D.S. Thermolytic Synthesis of Asphaltene-like Nitrogenous Bases and Study of Their Aggregative Stability // Processes. – 2024. – No. 12(7). – pp. 1–13. DOI: 10.3390/pr12071448
12. Ewoldt R.H., Winter P., Maxey J., McKinley G.H. Large amplitude oscillatory shear of pseudoplastic and elastoviscoplastic materials // Rheologica Acta. – 2009. – Vol. 49, Iss. 2. – pp. 191–212. DOI: 10.1007/s00397-009-0403-7
13. Bo B., Shuangliang Z.A review of experimental nanofluidic studies on shale fluid phase and transport behaviors // Journal of Natural Gas Science and Engineering. – 2021. – Vol. 86. DOI: 10.1016/j.jngse.2020.103745
14. Gizatullin R.R., Dvoynikov M.V., Romanova N.A., Nikitin V.V. Drilling in Gas Hydrates: Managing Gas Appearance Risks // Energies. – 2023. – Vol. 5, No. 16. – pp. 1–13. DOI: 10.3390/en16052387
15. Oliveira F.F., Sodré C.H., Marinho J.L.G. Numerical investigation of non-Newtonian drilling fluids during the occurrence of a gas kick in a petroleum reservoir // Brazilian Journal of Chemical Engineering. – 2016. – Vol. 33, Iss. 2. – pp. 297–305. DOI: 10.1590/0104-6632.20160332s20140024
16. Baldenko D.F., Verevkin A.V., Plotnikov V.M. Puti dal’neishego sovershenstvovaniya tekhnologii bureniya skvazhin s primeneniem vintovykh zaboinykh dvigatelei [Ways to Further Improve Well-Drilling Technology Using Positive-Displacement Downhole Motors] // Vestnik PNIPU. Geologiya. Neft’gazovoe i gornoe delo. – 2016. – Vol. 15, No. 19. – pp. 165–174. DOI: 10.15593/2224-9923/2016.19.7 (in Russian)
17. Sychev S.A., Russkov D.A. Reologicheskie i fil’tratsionnye svoistva rastvora pri ustroistve skvazhin v usloviyakh Krainogo Severa [Rheological and Filtration Properties of Drilling Fluids for Well Construction in the Far North] // Sbornik nauchnykh trudov… Kubanskogo gosudarstvennogo tekhnologicheskogo universiteta: Sbornik nauchnykh statei. – Krasnodar: IP Kabanov V.B. (izdatel’stvo “Novatsiya”), 2024. – pp. 96–108. – EDN NYKYPG. (in Russian)
18. Comminal R., Pimenta F., Hattel J.H., Alves M.A., Spangenberg J. Numerical simulation of the planar extrudate swell of pseudoplastic and viscoelastic fluids with the streamfunction and the VOF methods // Journal of Non-Newtonian Fluid Mechanics. – 2018. – Vol. 252. – pp. 1–18. DOI: 10.1016/j.jnnfm.2017.12.005
19. Manyatshe A., Sibali L.L. A review on the recovery of cellulose, lignin, and hemicellulose biopolymers from the same source of lignocellulosic biomass – Methodology, characterization and applications // Journal of Water Process Engineering. – 2025. – Vol. 70. DOI: 10.1016/j.jwpe.2025.107037
20. Rashidi M., Vaidyan K., Sedaghat A., et al. Introducing a Rheology Model for Non-Newtonian Drilling Fluids // Geofluids. – 2021. – Vol. 2021. – pp. 1–14. DOI: 10.1155/2021/1344776
21. Pilehvari A., Serth R. Generalized Hydraulic Calculation Method for Flow of Non-Newtonian Fluids in Eccentric Annuli // SPE Drilling & Completion. – 2009. – Vol. 24, Iss. 4. – pp. 553–563. DOI: 10.2118/111514-PA
22. Mitsoulis E. Fountain flow of pseudoplastic and viscoplastic fluids // Journal of Non-Newtonian Fluid Mechanics. – 2010. – Vol. 165, Iss. 1–2. – pp. 45–55. DOI: 10.1016/j.jnnfm.2009.09.001
23. Misbah B., Elgaddafi R., Malhas R.N. et al. Exploring the rheology characteristics of Flowzan and Xanthan polymers in drilling water-based fluids at high-temperature and high-shear rates // Geoenergy Science and Engineering. – 2024. – Vol. 243. DOI: 10.1016/j.geoen.2024.213309
24. Shah S.N., Dosunmu I.T. Annular Flow Characteristics of Pseudoplastic Fluids // Journal of Energy Resources Technology, Transactions of the ASME. – 2015. – Vol. 137, Iss. 4. DOI: 10.1115/1.4030106
25. Edo G.I., Ndudi W., Yousif E., et al. Biopolymers: An inclusive review // Hybrid Advances. – 2025. – Vol. 9. DOI: 10.1016/j.hybadv.2025.100418
26. Ryabinin M.V., Trukhanov K.A. Metodika opredeleniya poter’ na trenie v gidravlicheski gladkoi krugloi trube dlya psevdoplastichnykh zhidkostei [A Method for Determining Friction Losses in a Hydraulically Smooth Circular Pipe for Pseudoplastic Fluids] // Sovremennye problemy nauki i obrazovaniya. – 2015. – Vol. 1, No. 1. EDN: VIDZLB (in Russian)
27. Yunxing D., Xianshu D., Hao Y., et al. Study of solid-liquid two-phase flow model of drilling fluids for analyzing mud cake formation // Geoenergy Science and Engineering. – 2024. – Vol. 236. DOI: 10.1016/j.geoen.2024.212761
28. Yu W., Fuchang Y., Shanshan H. Application of natural materials containing carbohydrate polymers in rheological modification and fluid loss control of water-based drilling fluids: A review // Carbohydrate Polymers. – 2025. – Vol. 348, Part B. DOI: 10.1016/j.petsci.2023.08.015
29. Matvienko O.V., Bazuev V.P., Cherkasov I.S., Litvinova A.E. Issledovanie techeniya bitumnogo viazhushchego, opisyvaemogo model’yu Ostwal’da-de Veilya, v tsilindricheskoi trube [Study of the Flow of a Bituminous Binder Described by the Ostwald–de Waele Model in a Cylindrical Pipe] // Vestnik Tomskogo gosudarstvennogo universiteta. Stroitel’stvo i arkhitektura. – 2020. – Vol. 22, No. 1. – pp. 171–192. DOI: 10.31675/1607-1859-2020-22-1-171-192 (in Russian)
30. Gucuyener H.I., Mehmetoglu T. Flow of yield-pseudo-plastic fluids through a concentric annulus // AIChE Journal. – 1992. – Vol. 38, Iss. 7. – pp. 1139–1143. DOI: 10.1002/aic.690380717
31. Sorgun M., Ozbayoglu M.E. Predicting Frictional Pressure Loss During Horizontal Drilling for Non-Newtonian Fluids // Energy Sources. – 2010. – Vol. 33. – pp. 631–640. DOI: 10.1080/15567030903226264
32. Roch R.R., Oechsler B.F., Meleiro L.A.C., Fagundes F.M., Arouca F.O., Damasceno J.J.R., Scheid C.M., Calçada L.A. Settling of weighting agents in non-Newtonian fluids to off-shore drilling wells: Modeling, parameter estimation and analysis of constitutive equations // Journal of Petroleum Science and Engineering. – 2020. – Vol. 184. DOI: 10.1016/j.petrol.2019.106535
33. Tie Y., Jing-Yu Q., Xiao-Feng S., et al. A novel predictive model of drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids // Petroleum Science. – 2021. – Vol. 18, Iss. 6. – pp. 1729–1738. DOI: 10.1016/j.petsci.2021.09.003
34. Nascentes C.L., Murata V.V., Oliveira-Lopes L.C. Mathematical modeling of solids-drilling fluid separation in shale shakers in oil fields: A state of art review // Journal of Petroleum Science and Engineering. – 2022. – Vol. 208, Iss. 1. DOI: 10.1016/j.petrol.2021.109270
35. Ghazal A., Karimfazli I. Defying gravity: Injection of viscoplastic fluids in vertical channels // Journal of Non-Newtonian Fluid Mechanics. – 2025. – Vol. 336. DOI: 10.1016/j.jnnfm.2024.105350
36. Negrão C.O.R., Franco A.T., Rocha L.L.V. A weakly compressible flow model for the restart of thixotropic drilling fluids // Journal of Non-Newtonian Fluid Mechanics. – 2011. – Vol. 166, Iss. 23–24. – pp. 1369–1381. DOI: 10.1016/j.jnnfm.2011.09.001
37. Livescu S. Mathematical modeling of thixotropic drilling mud and crude oil flow in wells and pipelines – A review // Journal of Petroleum Science and Engineering. – 2012. – Vol. 98–99. – pp. 174–184. DOI: 10.1016/j.petrol.2012.04.026
38. Dvoinikov M.V., Sidorkin D.I., Yurtaev S.L., Grokhotov E.I., Ul’yanov D.S. Burenie glubokikh i sverkhglubokikh skvazhin s tsel’yu poiska i razvedki novykh mestorozhdenii poleznykh iskopaemykh [Drilling of Deep and Ultra-Deep Wells for the Prospecting and Exploration of New Mineral Deposits] // Zapiski Gornogo Instituta. – 2022. – Vol. 258. – pp. 945–955. DOI: 10.31897/PMI.2022.55 (in Russian)
39. Patent RU 2 798 347 C1, IPC C09K 8/24, C09K 8/12, E21B 7/00. Psevdoplastichnyi burovoy rastvor dlya uluchsheniya ochistki stvola skvazhiny i sposob bureniya s ego primeneniem (varianty) [Pseudoplastic Drilling Fluid for Improved Wellbore Cleaning and a Drilling Method Using It (Variants)]: No. 2022108143: filed 28.03.2022; published 21.06.2023 / Gaidarov A.M., Khubbatov A.A., Gaidarov M.M., Kadyrov N.T., Khrabrov D.V.; applicant: OOO “Nauchno-issledovatel’skii institut prirodnykh gazov i gazovykh tekhnologii Gazprom VNIIGAZ”. – 22 p. (in Russian)
40. Straupnik I.A., Morozov D.O. Razrabotka shpindel’noi sektsii vysokooborotnogo turbobura dlya bureniya glubokikh skvazhin v usloviyakh v vysshei stepeni krepkikh porod [Development of the Spindle Section of a High-Speed Turbodrill for Drilling Deep Wells in Ultra-Hard Formations] // Stroitel’stvo neftyanykh i gazovykh skvazhin na sushe i na more. – 2024. – Vol. 383, No. 11. – pp. 20–29. (in Russian)
41. Yogesh D., Reema J. Study of Non-Newtonian Fluid Models & their Applications – A Review // JETIR. – 2019. – Vol. 6, Iss. 6.
42. Gyanchandani Y., Patni H., et al. Investigation on the effect of coconut husk biofiber powder on the rheological and filtration properties of water-based drilling fluid // Geoenergy Science and Engineering. – 2025. – Vol. 244. DOI: 10.1016/j.geoen.2024.213411
43. Khan M.A., Mei-Chun L., Kaihe L., et al. Cellulose derivatives as environmentally-friendly additives in water-based drilling fluids: A review // Carbohydrate Polymers. – 2024. – Vol. 342. DOI: 10.1016/j.carbpol.2024.122355
Authors
E.L. Leusheva, Ph.D. Associate Professor, St.-Petersburg Mining University of Empress Catherine II
2–4/45, 21st Line V.O., St. Petersburg, 199106, Russian Federation
Email: Leusheva_EL@pers.spmi.ru
SCOPUS ID: 56609312400
ORCID ID: 0000-0002-0510-7769
D.M. Russkov, Student, St.-Petersburg Mining University of Empress Catherine II
2–4/45, 21st Line V.O., St. Petersburg, 199106, Russian Federation
Email: Russkovdmitriy123@gmail.com
A.O. Morozov, Student, St.-Petersburg Mining University of Empress Catherine II
2–4/45, 21st Line V.O., St. Petersburg, 199106, Russian Federation
Email: alexandr.05_07@mail.ru
For citation:
E.L. Leusheva, D.M. Russkov, A.O. Morozov Issledovaniye vliyaniya na reologicheskiye svoystva burovogo rastvora razlichnykh reagentov [Study of the influence of various reagents on the rheological properties of drilling fluid]. Neftyanaya Provintsiya, No. 2(46), 2026. pp. 253-298. DOI https://doi.org/10.25689/NP.2026.2.253-298. EDN UOPBWV (in Russian)